Replacement Locks For Patio Doors at Lowe's
Replacing the patio door lock is a simple and effective way to enhance the security of your home. But, it is crucial to perform routine maintenance and to install the lock correctly.
It is important to identify the type of patio door lock you are using in order to replace it with success. You can identify the type by observing the screw hole size and the face plate on the end.
Identifying Your Lock's Existing Lock
If you're considering buying new lock hardware it is essential to know the distinctions between different types of locks. This will help you locate a replacement suitable for your home and will ensure the safety and security of your home.
The most well-known type of lock is the cylinder lock, also known as pin and tumbler lock. This lock style uses a combination of bottom pins springs, top pins, and top pins to secure the keyhole and plug. Cylinder locks are available in a variety sizes, and it is important to determine the exact length and width of the cylinder you currently have before buying the replacement.
To determine the width take off the screws that hold the cylinder in position and carefully pull it out. Next, measure the distance between the outer edge of the cylinder and its inner edge and record the measurement in millimeters. Compare this measurement to the measurements of the lock you intend to purchase. This will ensure that the new lock will fit the door's lock hole.
Another way to determine the proper size of the lock you have is to test it by using a key. If the key fits into the cylinder without difficulty and is in the correct size, it's the width of the rekeying kit that you need. If the key does not slide in, it's likely that your cylinder has a different keyway and cannot be rekeyed to accept that brand of key.
It is always best to follow the instructions of the manufacturer that accompany a rekey kit for each lock, since each lock comes with its own set of installation requirements. It is crucial to test the new lock thoroughly after installation to ensure that it functions correctly and provides maximum security. You should also be aware of any additional features of your new lock, as these can affect its ease of use.
Measure the Width
A faulty patio door lock could result in serious security issues. It is crucial to examine your locks on a regular basis and replace them when necessary. This ensures that they're safe and working well, and can aid in preventing issues like a loose latch or keyway. If your current locks are worn or damaged, you can get replacements at Lowe's which will offer the security you need for your home.
Before you purchase a new patio door lock, it's important to determine the dimensions of your current one. This will give you an idea of what size to buy and avoid the risk of buying an unsuitable lock. There are two measurements you need to accomplish this: the backset and the case depth. The former refers to the distance between the edge of the lock's face to the centre of the round hole the handle spindle passes through and the other refers to the depth of the body of the lock that can be viewed from the outside of the door.
When deciding on the type of lock you want to use it is essential to consider how you will be using your doors. For example, if your sliding doors open horizontally, you'll have to choose a top and bottom tab style lock that connects to the strike plate, which prevents the door from being pushed or lifted open. If your patio doors are vertically open, you'll require a mortise latch with a spring loaded hook latch for added security.
When determining the dimensions of your current lock it is important to note the location of the screw holes. Some mortise lock screws are round and others are square. You'll be able to determine where the keyway is located. Some locks have a vertical keyway while others are 45-degree angled. It's a good idea to take a photo of the lock you have in place using your digital camera prior to attempting to remove it to ensure you get the correct replacement.
Once you've made the measurements now is the time to start looking for a new patio door lock. There are a variety of top-quality products on the internet and many of them are branded offering advanced security features to safeguard your home. It's important to look at locks and read reviews before you make a purchase. Don't forget to clean your locks regularly to stop dirt and other debris from interfering with the function of your doors.
Make sure to examine the screw holes
Patio doors play an important part in protecting your home. They should be inspected for signs of wear and tear to ensure they're functioning correctly. As time passes, your locks and spindle connecting the handles on the exterior and interior are likely to require replacement. A durable lock will not only help prevent unwanted entry but also increase energy efficiency, security and safety.
If you don't know the exact type of lock that your patio door has, there are several ways to narrow your search for a replacement. First, try to determine what kind of keyway it is using. Rectangular mortise locks with cutouts are typically used in aluminum patio doors. E2126 and E2079 locks are set in a recess inside the frame of vinyl or wood patio doors. Uploading a picture of the lock using your digital camera will help you determine the type of lock you have.
Another way to determine the type of lock you have is to examine the screw holes. Most sliding patio door locks have screw holes that align with the latch keeper that is mounted on the side jamb, however they're not always the same. For instance, some screws are longer than others and might have an end with a different threaded. Some screws are equipped with washers or a hexagonal nut, which can change the way they fit in the lock's hasp.
Once you've identified the kind of lock your home has, you can begin making plans to replace it. It is necessary to clean the lock first with a damp brush or cloth to get rid of any dirt that could be preventing its operation. Once clean, you can apply a silicone-based lubricant in order to keep the locking mechanism in good shape and quiet.
It's a great idea to replace your screws with longer ones. This will give you a better grip and make it easier to put in the new lock. Once you've done that, it's a good idea to test the handle and observe how the latch hasp is engaged within the lock.
If it's not able to engage quickly, you may need to put an hex or washer behind the hasp to get it to hold more of the door's lip. You can add a shim on the side of the lockkeeper's jamb to see if it helps.
Check the Lock Snib
The snib is a mechanism that locks your door handle. It is possible to engage and deengage the snib to open or close your patio doors. It's the first thing you should check when your locks aren't functioning correctly. You can also inspect the keepers (located on the top and bottom of the door frame) for any looseness or misalignment that could cause them to shred. Check that your snib has been seated correctly and that the lock has not become stuck or blocked in any other way.
The most common patio door locks are made of steel mortise latches that hold your sliding glass doors. They're installed in the door frame and are available in a variety of designs which makes them a great security measure. Some are designed to accommodate a key, while others use an oval-shaped cutout for easy locking and unlocking.
A thumb-screw style step-on lock is another option that is popular. repairmywindowsanddoors holds your sliding door in place without the need to turn the knob. These locks are typically used on older patio doors, but could be a good choice for securing wood- or vinyl-framed sliding doors as well.
When you examine your existing patio lock, take note of the type and size screw holes used to attach the escutcheon and the lock body. This will help you pick a lock that has the correct screw holes. It's a good idea to examine your strike plate to make sure it's securely secured.
If you have Jason Windows boltlock slider doors between 2000 and 2009, make sure the screws holding the door in place and are not loose or missing. The screws keep the snib in an open "vent" position to allow airflow, but also encourage security, and are important to stop your lock from shearing. It is recommended for all locks to be inspected regularly and cleaned regularly to avoid dirt, debris or corrosion from obstructing the operation of the lock.
If your snib has broken it could be possible to simply replace the entire strike plate and snib assemblage. If, however, your snib's alignment is not aligned properly, you can correct it yourself by taking the strike plate off with a putty knife, and then backing out the adjustment screw (located above and below the screw) to move the strike plate up or down until its engagement tongue is aligned with the Milgard logo on the snib.